MatekSyS H743-WING V2 Flight Controller

  • Sale


  • Regular price £67.03

Tax included. Shipping calculated at checkout.
Found a better price?
Order in 0H, 44M, 42 Seconds (before 3pm AEST) for same day despatch.


The Matek H743-WING V2 is a dedicated flight controller for fixed wing designed to heavily support ArduPilot. The H743 features multiple high output BECs, 8A for servos (at 5V,6V or 7.2V) 9V/2A for FPV gear (12V option) and 5V/2A for accessories like GPS module, RC receiver etc. The Matek H743-WING V2 also has a number of built in features like 7 usable Uart ports (each with inversion), MicroSD for blackbox logging, dual camera switching, DPS310 Barometer and built in AT7456E OSD (On Screen Display).

The Matek H743-WING features an ultra fast 480MHz processor with 2MB Flash and dual gyros MPU6000/ICM42605. CAN BUS is included to support future peripherals.

 

H743-WING V2

  • MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
  • IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
  • Baro: Infineon DPS310 (I2C2)
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD card slot (SDIO)
  • 7 x Uarts (1,2,3,4,6,7,8) with built-in inversion
  • 13 x PWM outputs(including “LED” pad)
  • 2 x I2C
  • 1 x CAN
  • 6 x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
  • 3 x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 1 x SPI3 breakout
  • USB/Beep Extender with Type-C(USB2.0)
  • Dual Camera Inputs switch
  • 5V/9V(12V) for Camera/VTX power switch
  • High-precision Current Sense (90A continuous, 220A peak)
  • Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
  • ADC VB2 voltage divider: 1K:20K
  • ADC AirSpeed voltage divider: 20K:20K
  • INAV TR/SA VTX control: Yes
  • Beeper: Yes
  • RSSI: Yes
  • Analog Airspeed sensor: Yes
  • Digital Airspeed sensor: Yes
  • Static power 160mA@5V


PDB Specifications

  • Input voltage range: 9~36V (3~8S LiPo) w/TVS protection
  • 2 x ESC power pads
  • Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
  • Sense resistor: 90A continuous, 220A burst


Firmware

  • ArduPilot(ChiBiOS): MATEKH743
  • INAV: MATEKH743


BEC 5V output

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Output 5.15 +/- 0.1V DC
  • Continuous current: 2 Amps, Max.3A


BEC 9V/12V output

  • Designed for Video Transmitter, Camera, Gimbal ect
  • Continuous current: 2 Amps, Max.3A
  • 12V option with Jumper pad


BEC Vx output

  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
  • Continuous current: 8 Amps, Max.10A


BEC 3.3V output

  • Linear Regulator
  • Continuous current: 200mA


Physical

  • Mounting: 30.5 x 30.5mm, φ4mm with Grommets φ3mm
  • Dimensions: 54 x 36 x 13 mm
  • Weight: 30g with USB extender


Including

  • 1 x H743-WING V2
  • 1 x USB(Type-C)/Beep (Passive buzzer) Extender
  • 1 x 20cm SH-4P to GH-4P cable for CAN port
  • 1 x 20cm SH-6P to SH-6P cable for USB extender
  • 1x Rubycon ZLH 35V 470uF capacitor
  • Dupont 2.54 pins (Board is shipped unsoldered)

Why order from Rising Sun FPV?

• FREE Express* shipping over $250.

• Orders ship out of Townsville, QLD, Australia at 1530.

• Active on Instagram - Tag us or DM us!

• Watch what we are up to on our YouTube Channel!

• Join our Facebook Page for updates and RSFPV news.

• GST Registered.

• Gifts with every order!

• Veteran Owned and Operated

• Defence and Service discounts - Apply Here

• 3D Printing and Custom design – Inquire Here.

• Visit us at our Store and have a yarn.

• Sponsor of Townsville FPVR, Next Level FPV

and the Australian Army Drone Racing Team.

• FPV Drone service, support and repairs.

• Earn points for every $1 spent.

• Buy now and pay later with Zippay, Afterpay, Humm and Laybuy.