{"product_id":"snapmaker-u1-3d-printer","title":"Snapmaker U1 3D Printer","description":"\u003cp\u003eThe Snapmaker U1 is a consumer toolchanger 3D printer. Its SnapSwap™ system carries four independent, pre-heated toolheads and swaps between them in around five seconds, so you get true multi-colour and multi-material prints with far less purge waste than single-nozzle systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSnapSwap™ 4-toolhead system with direct swaps in about 5 seconds\u003c\/li\u003e\n\u003cli\u003eUp to 5× faster with up to 5× less waste than shared-nozzle multi-colour printing\u003c\/li\u003e\n\u003cli\u003eMulti-colour and multi-material printing – rigid, flexible and engineering filaments\u003c\/li\u003e\n\u003cli\u003eSmart calibration and compensation keeps toolheads aligned for sharp, consistent prints\u003c\/li\u003e\n\u003cli\u003eEffortless filament management with RFID auto-loading and backup mode\u003c\/li\u003e\n\u003cli\u003eUp to 500 mm\/s print speed and 20,000 mm\/s² acceleration on a CoreXY motion system\u003c\/li\u003e\n\u003cli\u003e270 × 270 × 270 mm build volume for large models and batch printing\u003c\/li\u003e\n\u003cli\u003eAI-assisted print monitoring (spaghetti, runout and placement detection)\u003c\/li\u003e\n\u003cli\u003eOptional Top Cover unlocks high-temperature materials such as ABS, ASA and PA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSupport:\u003c\/strong\u003e Rising Sun FPV is an authorised Snapmaker reseller. Technical documentation is available on the \u003ca href=\"https:\/\/wiki.snapmaker.com\/en\/home\" target=\"_blank\"\u003eSnapmaker Wiki\u003c\/a\u003e.\u003c\/p\u003e","brand":"Snapmaker","offers":[{"title":"Default Title","offer_id":50620050014433,"sku":"81100","price":905.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0003\/8859\/5740\/files\/SnapmakerU13DPrinter_1.webp?v=1790747057","url":"https:\/\/risingsunfpv.com\/products\/snapmaker-u1-3d-printer","provider":"Rising Sun FPV","version":"1.0","type":"link"}