Flycolor X-Tower 2 F7 Flight Controller Stack w/ Bluetooth LED 60A 3-6S BLHeli32 4in1 ESC - 30x30mm

Introducing the FLYCOLOR X Tower2 F7 BL32 60A Flight Stack.

Ready to take your FPV drone to the next level? Meet the FLYCOLOR X Tower2 F7 BL32 60A Flight Stack, your ultimate companion for high-performance flights and seamless control.

Engineered with precision and packed with advanced features, this flight stack is the epitome of reliability and power. The F7 processor ensures lightning-fast response times, allowing you to execute even the most intricate maneuvers with ease.

Equipped with BL32 60A ESCs, this flight stack delivers unparalleled motor control and efficiency, ensuring smooth and precise movements throughout your flight. Whether you’re racing through challenging courses or capturing breathtaking aerial footage, the FLYCOLOR X Tower2 has got you covered.

With its robust construction and intelligent design, this flight stack is built to withstand the rigors of FPV flying, providing you with a reliable and consistent performance every time you take to the skies. Elevate your drone experience with the FLYCOLOR X Tower2 F7 BL32 60A Flight Stack and soar to new levels of excitement and adventure.

Features:

• MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight.
• Two layers tower structure between 4in1 ESC and FC, using cable for quick connection, using silicone vibration absorber for supporting, reducing the effect of vibration on Flight Control.
• Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
• The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multishot.
• All Dshot and Proshot signals are supported.
• Supports SBUS,SPEKTRUM1024/2048 etc. remote control / receiving mode.
• FC integrated 3.3V,5V, 12V for the receiver, VTX, camera, buzzer, LED, and other peripheral devices.
• 4-way led port, independent 5V BEC power supply, making the power supply more safe and reliable.
• Supports Betaflight Configurator to adjust the LED color.

Specifications:

• Item Brand: Flycolor
• Item Model: X-Tower 2 60A
• Support Voltage: 3-6S Lipo
• Con. Current: 60A
• Burst Current: 70A
• Structure: Tower
• F.C Volt: 3.3V/5V/10V
• MCU of F7: STM32F722
• F7 Firmware: STM32F7X2 (Config.: FLYCOLORF7)
• ESC Firmware: Flycolor_X_Cross_BL_32
• Bluetooth：FC_Bluetooth.
• USB: Type C
• Installation Hole: 30.5×30.5mm, M3
• Size: 41.7×44.8×16.7mm
• Weight: 26g

ESC

• MCU:STM32F051 ,ARM 32-bit Cortex MCU, frequency up to 48 MHZ.
• MOSFET with high performance and low Rds, not afraid of large current, more suitable for rapid flight.
• ESC firmware: Flycolor_X_Cross_BL_32.
• Two layers tower structure between 4in1 ESC and FC, using cable for quick connection, using silicone vibration absorber for supporting, reducing the effect of vibration on Flight Control.
• Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
• The code supports regular 1-2ms pulse width input, as well as Oneshot125, Oneshot42, and Multishot.
• All Dshot and Proshot signals are supported.

FC

• FC firmware: STM32F7X2（Config.:FLYCOLORF7）
• FC board:FLYCOLORF7.
• MCU:STM32F722.
• Gyro：MPU-6000 SPI.
• Bluetooth：FC_Bluetooth.
• USB: Type C.
• Supports SBUS,SPEKTRUM1024/2048 etc. remote control / receiving mode.
• FC integrated 3.3V,5V, 12V for receiver, VTX, camera, buzzer, LED and other peripheral devices.
• 4-way led port, independent 5V BEC power supply, making the power supply more safe and reliable.
• Supports Betaflight Configurator to adjust the LED color.
• Install holes:30.5x30.5mm,M3.

Package Includes:

• 1 x 32Bit 4in1 ESC 
• 1 x F7 Flight Control 
• 8 x Silicone vibration absorber 
• 4 x LED wire 
• 4 x Assemble screw M3×22 
• 5 x O-Ring x
• 1 x ESC /FC connecting wire (2x10p SH1.0) 
• 1 x Power wire(XT60) 
• 1 x Electrolytic capacitor